Metal wall art provides a stunning piece to your indoor and outdoor space. The metal wall art can elevate the beauty of your living area. Whether you have recently purchased your metal wall art or looking for a new place to relocate your decor, having the right tools is the first step in hanging your metal art.
Most metal art are heavy and requires selecting the suitable screws and wall anchors to hold them in place. You want to ensure that the hardware used to hold up the metal wall art can support the weight of the piece.
Having your metal wall art can last you for a long time. Ensuring that you have the right tools and surface to hang the metal art will prevent it from getting damaged and avoid injury if the unfortunate event the metal art falls from its mount.
Fortunately, hanging metal wall art is easier than it might seem. In this article, we will cover the different methods for hanging metal wall art, including how to hang metal art prints, outdoor metal art, metal wall art on concrete, metal wall art on drywall, and how to hang metal wall art without nails.
Choosing the right location for Hanging your Metal Wall Art.
Before you start hanging your metal wall art, you must consider where you want to hang it. Here are several factors that you’ll need to consider:
The lighting of the space: Hiding or hanging your metal wall art in a room that hardly gets any light is not ideal for exemplifying the metal art’s beauty. Consider the lighting and ambiance you want to create.
Placing the wall art in a spot where it will reflect natural light or near a lamp will create a cozy atmosphere. If you decide to hang the metal wall art in your bedroom, you should have the wall art under a lamp to reflect the light and be visible at night. This will allow you to enjoy the art and create a serin mood.
Consider the Wall Space: Considering the amount of space you have available requires you to consider if the metal art complements the room’s overall design.
Having too much traditional art space can clush with modern-looking metal wall art. Most metal wall art have a clean and minimalist design. Consider a piece with intricate detail and an antique finish if your wall space has more conventional designs.
Avoid Direct Sunlight and Humidity: This is important if your metal wall art is hung outside. Avosi hanging the meal wall in direct sunlight as this will cause the colors to fade over time. High humidity will cause the metal to rust and corrode quicker. If you must hang the metal wall art outside in direct sunlight and humidity, consider purchasing a UV- resistant coating to apply on your metal wall art. The coating should be applied every few months per the manufacturer’s instructions.
How Do You Hang Outdoor Metal Art?
Before hanging the metal art, you’ll need to gather the following tools. Here’s a list of what you’ll need:
- A drill with a bit appropriate for the type of wall you’ll be drilling into
- Wall anchors (if the wall is drywall or plaster)
- Screws that fit the wall anchors
- A level
- Measuring tape
Here is the step-by-step guide to hanging your outdoor metal art:
Choose the right location: When hanging metal art, it’s important to choose the right location. The size of your metal artwork will determine where to hang your metal art. Having the right space size will allow your artwork to fit correctly.
Also, it would be best if you thought about the surrounding elements like wind, rain, and direct sunlight that may affect the durability of your artwork.
Gather your tools: Make sure you have the tools required to hang your artwork. The tools listed above should be nearby before starting your artwork hanging exercise.
Mark the location for hanging your artwork:
- Use a measuring tape to measure and mark the spot where you want to hang your metal art.
- Make sure the markings are level and evenly spaced.
- Use a drill to make small pilot holes where you marked. This will make it easier to insert the screws or anchors.
Pre-drill holes: To make the process of inserting screws or anchors easier, it’s recommended to use a drill to create small pilot holes that you marked on the wall. This ensures that the holes are precisely placed and the screws or anchors can easily be inserted.
Hang the metal artwork: To hang your metal artwork safely and efficiently, start by holding it against the wall and inserting screws or anchors into pre-made pilot holes. Please make sure they are secure and the artwork is level. Once it’s hung securely, step back and enjoy its stunning impact on your outdoor space.
Metal wall art can add elegance to your space. If this is your first time hanging up your art, this might seem challenging since you have never done this before. Following the steps outlined above, you can hang your wall art with ease and confidence.
Take your time to measure and ensure that the art is all level and straight. With a bit of patience and attention to detail, you can create a beautiful display that will enhance the decor of any space.
Check out these related posts: